Plumbing, drains and water treatment across Las Vegas and Clark County. Call (725) 255-9011
PreferredPlumber Company

Faucet repair and installation in Las Vegas and Clark County

Faucet repair and installation, kitchen and bath

Cartridges, valves and replacements. Hard water is why valley faucets seize earlier than the box promises.

  • Diagnosis before a price
  • Permitted work handled through the right office
  • No invented credentials on this site
Common faucet complaints, illustrative image for faucet repair and installation in Las Vegas
Illustrative image, not a photo of our work
291 ppmLas Vegas tap water hardness
17 gpgGrains per gallon, classed very hard
90%Of Southern Nevada water comes from Lake Mead
5Incorporated cities in Clark County, the rest is county

Figures above are published third party data, not company claims. Sources: Las Vegas Valley Water District, water district hardness figure, water district supply figure, Clark County.

  • Las Vegas and Clark CountyThe service area on our own mark. Every incorporated city in the valley plus the unincorporated towns, which is where about a million people live.
  • Repair, install, maintainThe three verbs on our logo, and the whole scope. Emergency repair through to planned replacement and annual servicing.
  • Water softeners, all makes and modelsInstallation, repair, replacement and maintenance, including units that came with the house. We are not an authorised dealer for any brand and we do not claim to be.
  • Sourced facts, no invented credentialsEvery local figure on this site links to the agency that published it. Nothing about licences, ratings or guarantees is printed until it has been verified.
The short answer

A faucet that drips, sticks or will not shut off is usually a cartridge or a seat, not a new faucet. In 17 grain water those parts scale up and seize sooner than they would elsewhere, which is why this is such a common valley call.

Common faucet complaints

Most of these are repairs. One or two mean replacement.

  • A steady drip from the spout after the handle is closed
  • A handle that is stiff, gritty or will not turn fully
  • Water leaking from the base of the spout or around the handle
  • Low flow from one faucet while the rest of the house is fine
  • A sprayer or pull down head that has stopped sealing
  • Water under the cabinet, which may be the faucet or the supply connections
  • A finish that has pitted or corroded, which is usually a replacement matter
Try this before booking anything

If flow from one faucet is weak, unscrew the aerator at the tip of the spout and look inside. In this valley it is very often packed with white mineral scale. Cleaning or replacing an aerator is a minutes long job and it fixes a surprising share of low flow complaints for the cost of nothing.

Repair or replace, faucet by faucet

The deciding factors are the part, the finish and whether the fixture is worth keeping.

Faucet repair and replacement decisions
SituationThe usual answer
Dripping spoutA cartridge, seat or O ring. A repair, and usually a quick one, provided the part is available for that model.
Stiff or seized handleMineral build up in the cartridge. Replace the cartridge and it feels new.
Leaking at the baseSeals or the mounting. Repairable in most cases.
Discontinued model with no partsReplacement, and it is worth knowing that a very cheap faucet often has no parts path at all.
Corroded or pitted finishReplacement, because the finish is not repairable and the internals are usually the same age.
Supply line or shut off leakingNot the faucet. Those parts get replaced, and a shut off valve that no longer closes is worth doing while access is open.
Water hardness scale in grains per gallon, showing Las Vegas tap water at 17 grains per gallon inside the very hard band
Diagram, not a photograph of our work
How it works

How the visit goes

  1. Identify the fixture

    Brand and model where visible, because parts availability decides repair against replace. A photograph on the call helps.

    On the call
  2. Diagnose the actual leak path

    Spout, base, handle or supply. They look similar under a cabinet and they are different repairs.

    On site
  3. Repair, or fit the replacement

    Cartridge and seal work where the part exists. New fixture fitted where it does not, including new supply lines.

    Same visit where parts allow
  4. Check the shut offs too

    While we are under there, the shut off valves get checked, because a valve that will not close turns a future faucet job into a whole house water shut down.

    Same visit

If you are buying a new faucet yourself, the single most useful question is whether replacement cartridges are available for it. That answer predicts how long it lasts here better than the price does.

Diagram of the five things that decide a plumbing invoice, from access through to diagnosis time
Diagram, not a photograph of our work
What it costs

What decides the price of faucet repair and installation

No rate or range for this work is published anywhere on this site, because none has been confirmed for publication for this business. What follows is the honest version: what actually moves the number on a job like this, so you can read any quote and judge it.

What you get from the call

Describe what is happening and you will hear what it usually means, what the repair involves and what somebody needs to see before quoting it. That happens whether or not you book the work.

What moves the number on this job

  • Access. The same repair costs very different amounts behind a cabinet, inside a wall, under a slab or four feet down in a yard. Access is usually the largest single variable.
  • Repair or replace. A cartridge is a part. A failed tank, exhausted softener resin or brittle polybutylene is a replacement, and no amount of repair spend fixes those.
  • Parts, and whether they still exist. A common cartridge is cheap and on the van. A control head for a discontinued softener is neither.
  • Permit and inspection, where the work needs them. A water heater replacement, a repipe and sewer work are permitted and inspected in this valley. That is real time and real cost, and work done without it turns up later in a buyer inspection.
  • Diagnosis time. Finding a hidden leak is a separate skill from fixing it, and on a slab leak the locating is most of the job. Paying for it is cheaper than exploratory demolition.

What to ask whoever quotes you

  • Which of the five things above is driving this number.
  • Is this a repair or a replacement, and what made you choose.
  • Does the price include the permit and the inspection, where the work needs one.
  • What is your Nevada contractor licence number. Plumbing is classification C-1, Plumbing and Heating, and the Nevada State Contractors Board register lets you check any licence in about a minute. Ask us the same question.

Questions people ask

Is a dripping faucet worth fixing?

Yes, and usually cheaply. It is a cartridge or a seal in most cases. It is also wasting water continuously, which in a valley that watches its water is worth a few minutes of someone time.

Can you install a faucet I bought?

Yes. We will fit it, fit new supply lines, and tell you honestly if the fixture is a design that will give you trouble. That is more useful before it is installed than after.

Why do my faucets keep failing?

Hard water. Mineral deposits build up inside cartridges and on seats, so the wearing parts wear faster than the manufacturer expected. It is the most common reason valley faucets outlive their internals by years.

Comparison of water treatment options showing which of softening, reverse osmosis, carbon filtration and salt free conditioning removes hardness
Diagram, not a photograph of our work
Checkable, not claimed

We have no reviews to show you yet, so here is verifiable fact instead

A new site with a wall of glowing testimonials should make you suspicious, and this one does not have them because no review corpus has been verified for this brand. Rather than fill the space with invented quotes, these are three things about your water and your county that you can check against the agency that published them.

Your water is 291 ppm, and that is not our opinion

The Las Vegas Valley Water District publishes valley tap water at 291 parts per million, 17 grains per gallon, and categorises it as very hard. It is the reason fixtures and water heaters here do not last as long as the box promised.

Read the water district page

Softening is a preference, not a health need

The Southern Nevada Water Authority states that removing calcium and magnesium softens water but is not a necessity to protect your health. Any company telling you otherwise is contradicting the agency that tests your supply.

Read the water authority page

Nevada plumbing is licensed as C-1

Plumbing and Heating, issued by the Nevada State Contractors Board under chapter 624. You can check any contractor licence on their register in about a minute, and you should, before work starts.

Check a licence on the register
What the work looks like

Faucet repair and installation in a valley home

An illustrative image, not a photograph of our work.

Faucet repair and installation work in a Las Vegas home, illustrative image
Illustrative image, not a photo of our work

What the work looks like

An illustrative view of the equipment and access this job involves. It is not a photograph of our work.

Photography note

These are illustrations and diagrams, not photographs of our work. No job photography, before and after pair, van, uniform or team photograph appears anywhere on this site, because we do not have verified photographs of this company work yet and generating them would fabricate evidence about a real business. Real job photography is on the list to add.

Where we work

Faucet repair and installation across Clark County

We cover faucet repair and installation in every community below. Each area page names the authority that issues a permit for that address, which matters whenever this work is permitted.

One way in, and it is the phone

Talk to us about faucet repair and installation

One call. You get the diagnosis before the number, and the cost of the visit before anyone is sent out.

Reach Preferred Plumber Company

Licence
Nevada State Contractors Board licence NV #0078989, C-1D Plumbing held by Preferred Plumbing LLC
Service area
Clark County, Nevada, including Las Vegas, Henderson, North Las Vegas, Summerlin, Paradise, Spring Valley, Enterprise, Sunrise Manor, Centennial Hills and Boulder City

We are a service area business. We come to you, so there is no counter to visit and no street address on this page. The number above is the fastest way in.

What to have ready

None of it is required. All of it makes the call shorter.

Calling about Faucet repair and installation? Say that first and we can skip straight to the questions that matter for it. Something else? Choose from the full service list.

  • Where you areThe address, and a cross street if the address is new or hard to find. Which end of the valley you are on decides who is closest.
  • What is happening, in your own wordsNo plumbing vocabulary needed. "Water under the sink since this morning" is a better description than a guess at the cause.
  • Whether water is running right nowThis is the question that changes everything else. If it is, say so first and we will talk you to the shutoff before anything else.
  • What you have already triedPlunged it, reset the disposal, flipped the breaker, ran the softener through a regeneration. It saves repeating the steps that did not work.
  • Whether you own or rentA landlord or an HOA sometimes has to authorise the work, and it is better to find that out on the phone than at the door.

Water pouring right now? Do not read the rest of this. Call (725) 255-9011 and shut off the supply while it rings.

Faucet repair and installation questions

Why is water pressure low at just one faucet?

Almost always a scaled aerator or a clogged cartridge, which in 17 grain water is common. Unscrew the aerator and look for white mineral deposits. If cleaning it fixes the flow, you have saved yourself a service call.

How long does a faucet installation take?

A straightforward replacement in an accessible cabinet is typically under an hour. Difficult access, corroded shut off valves or a different mounting configuration take longer.

Should I replace the supply lines too?

When a faucet is replaced, yes. Braided supply lines have a service life, and a failed one delivers water at full pressure into a cabinet. They are inexpensive and doing them while access is open is the cheap moment.

Are touchless faucets worth it?

They work well and they need power, and the electronics are another thing that can fail. In hard water the mechanical parts still scale, so it changes convenience rather than longevity.

Can a faucet cause a cabinet leak?

It can, and so can the supply lines, the shut off valves, the drain connection or the sink seal. All five look identical once the cabinet floor is wet, which is why the leak path gets traced before anything is replaced.

Talk to someone about faucet repair and installation

Describe what is happening and we will tell you what it usually takes to fix, before anyone comes out.