Plumbing, drains and water treatment across Las Vegas and Clark County. Call (725) 255-9011
PreferredPlumber Company

Hydro jetting in Las Vegas and Clark County

Hydro jetting for lines a cable will not fix

High pressure water that scours the pipe wall. The right answer for grease, scale and roots, the wrong answer for fragile pipe.

  • Diagnosis before a price
  • Permitted work handled through the right office
  • No invented credentials on this site
When jetting is the right tool, illustrative image for hydro jetting in Las Vegas
Illustrative image, not a photo of our work
291 ppmLas Vegas tap water hardness
17 gpgGrains per gallon, classed very hard
90%Of Southern Nevada water comes from Lake Mead
5Incorporated cities in Clark County, the rest is county

Figures above are published third party data, not company claims. Sources: Las Vegas Valley Water District, water district hardness figure, water district supply figure, Clark County.

  • Las Vegas and Clark CountyThe service area on our own mark. Every incorporated city in the valley plus the unincorporated towns, which is where about a million people live.
  • Repair, install, maintainThe three verbs on our logo, and the whole scope. Emergency repair through to planned replacement and annual servicing.
  • Water softeners, all makes and modelsInstallation, repair, replacement and maintenance, including units that came with the house. We are not an authorised dealer for any brand and we do not claim to be.
  • Sourced facts, no invented credentialsEvery local figure on this site links to the agency that published it. Nothing about licences, ratings or guarantees is printed until it has been verified.
The short answer

Hydro jetting uses high pressure water to scour a pipe wall clean instead of punching a hole through the blockage. It is the right answer for grease, sludge and scale, and the wrong answer for pipe that is too fragile to take it, which is why we camera first.

When jetting is the right tool

Jetting costs more than cabling and does a different job. These are the cases where it is worth it.

  • The same line has been cabled more than once and keeps closing up
  • A kitchen or restaurant line with years of grease built onto the pipe wall
  • Scale build up narrowing an older line, which very hard water encourages
  • Root intrusion where the roots need cutting out rather than parting
  • A line about to be lined or inspected, which has to be clean first
  • Commercial drains on a preventative schedule rather than a reactive one
When we will say no

Deteriorated clay, badly corroded cast iron, or polybutylene that is already brittle may not survive the pressure. If the camera shows pipe in that condition, jetting it is how a blocked drain becomes an excavation on the same afternoon. We would rather tell you the pipe needs replacing.

How a jetting job is run

The sequence is what makes it safe.

Hydro jetting procedure, stage by stage
StageWhat happens and why
Camera firstPipe material and condition assessed, plus the location of the blockage and of any structural fault. This is the stage that decides whether jetting happens at all.
AccessWorked from a proper cleanout wherever one exists, which protects fixtures and gives the hose a clean run.
Pressure and nozzle matched to the jobGrease, roots and scale take different nozzles. Pressure is set for the pipe, not for the worst case.
Work the lengthThe line is worked in stages rather than blasted once, so debris moves downstream instead of packing tighter.
Camera againThe proof. A second pass shows the pipe wall clean and confirms nothing structural was hiding behind the blockage.
ReportWhat was in there, what the pipe looks like now, and whether anything needs planning for.
Comparison of drain clearing methods showing cabling, hydro jetting and camera inspection and what each is for
Diagram, not a photograph of our work
How it works

What to expect on the day

  1. Inspection and go or no go

    If the pipe cannot take jetting you hear it here, with the camera footage as the reason rather than an opinion.

    First
  2. Set up and protect

    Access opened, area protected. Jetting moves water and debris, and a careful setup is the difference between a clean job and a mess.

    Before the work
  3. Jet the line in stages

    Worked progressively along the length with the nozzle matched to what is in the pipe.

    Main work
  4. Verify and advise

    Second camera pass, then a straight answer on whether this line needs a maintenance interval or a repair plan.

    Before we leave

For a commercial kitchen line, jetting on a schedule is cheaper than jetting in an emergency, because the emergency version arrives with a closed kitchen attached.

Timeline of residential pipe materials by build era, from galvanised steel through copper and polybutylene to PEX
Diagram, not a photograph of our work
What it costs

What decides the price of hydro jetting

No rate or range for this work is published anywhere on this site, because none has been confirmed for publication for this business. What follows is the honest version: what actually moves the number on a job like this, so you can read any quote and judge it.

What you get from the call

Describe what is happening and you will hear what it usually means, what the repair involves and what somebody needs to see before quoting it. That happens whether or not you book the work.

What moves the number on this job

  • Access. The same repair costs very different amounts behind a cabinet, inside a wall, under a slab or four feet down in a yard. Access is usually the largest single variable.
  • Repair or replace. A cartridge is a part. A failed tank, exhausted softener resin or brittle polybutylene is a replacement, and no amount of repair spend fixes those.
  • Parts, and whether they still exist. A common cartridge is cheap and on the van. A control head for a discontinued softener is neither.
  • Permit and inspection, where the work needs them. A water heater replacement, a repipe and sewer work are permitted and inspected in this valley. That is real time and real cost, and work done without it turns up later in a buyer inspection.
  • Diagnosis time. Finding a hidden leak is a separate skill from fixing it, and on a slab leak the locating is most of the job. Paying for it is cheaper than exploratory demolition.

What to ask whoever quotes you

  • Which of the five things above is driving this number.
  • Is this a repair or a replacement, and what made you choose.
  • Does the price include the permit and the inspection, where the work needs one.
  • What is your Nevada contractor licence number. Plumbing is classification C-1, Plumbing and Heating, and the Nevada State Contractors Board register lets you check any licence in about a minute. Ask us the same question.

Reasonable concerns about high pressure water

Will jetting damage my pipes?

In sound pipe, no. In pipe that is already failing, it can, and pretending otherwise is how a plumber turns a clog into a dig. The camera inspection beforehand is not an upsell, it is the step that answers this question before the equipment comes out.

Is it worth the extra cost over snaking?

If the line keeps blocking, yes, because you are paying once instead of every few months. For a first time single clog, snaking is usually the sensible spend and we will say so.

Can jetting clear roots?

It can cut and flush roots out, which is more thorough than parting them with a cable. But roots got in through a joint or a crack, and that opening is still there. Jetting buys time; the sewer line page covers the permanent fix.

Diagram of sewer line repair options, showing spot repair, trenchless lining and full replacement
Diagram, not a photograph of our work
Checkable, not claimed

We have no reviews to show you yet, so here is verifiable fact instead

A new site with a wall of glowing testimonials should make you suspicious, and this one does not have them because no review corpus has been verified for this brand. Rather than fill the space with invented quotes, these are three things about your water and your county that you can check against the agency that published them.

Your water is 291 ppm, and that is not our opinion

The Las Vegas Valley Water District publishes valley tap water at 291 parts per million, 17 grains per gallon, and categorises it as very hard. It is the reason fixtures and water heaters here do not last as long as the box promised.

Read the water district page

Softening is a preference, not a health need

The Southern Nevada Water Authority states that removing calcium and magnesium softens water but is not a necessity to protect your health. Any company telling you otherwise is contradicting the agency that tests your supply.

Read the water authority page

Nevada plumbing is licensed as C-1

Plumbing and Heating, issued by the Nevada State Contractors Board under chapter 624. You can check any contractor licence on their register in about a minute, and you should, before work starts.

Check a licence on the register
What the work looks like

Hydro jetting in a valley home

An illustrative image, not a photograph of our work.

Hydro jetting work in a Las Vegas home, illustrative image
Illustrative image, not a photo of our work

What the work looks like

An illustrative view of the equipment and access this job involves. It is not a photograph of our work.

Photography note

These are illustrations and diagrams, not photographs of our work. No job photography, before and after pair, van, uniform or team photograph appears anywhere on this site, because we do not have verified photographs of this company work yet and generating them would fabricate evidence about a real business. Real job photography is on the list to add.

Where we work

Hydro jetting across Clark County

We cover hydro jetting in every community below. Each area page names the authority that issues a permit for that address, which matters whenever this work is permitted.

One way in, and it is the phone

Talk to us about hydro jetting

One call. You get the diagnosis before the number, and the cost of the visit before anyone is sent out.

Reach Preferred Plumber Company

Licence
Nevada State Contractors Board licence NV #0078989, C-1D Plumbing held by Preferred Plumbing LLC
Service area
Clark County, Nevada, including Las Vegas, Henderson, North Las Vegas, Summerlin, Paradise, Spring Valley, Enterprise, Sunrise Manor, Centennial Hills and Boulder City

We are a service area business. We come to you, so there is no counter to visit and no street address on this page. The number above is the fastest way in.

What to have ready

None of it is required. All of it makes the call shorter.

Calling about Hydro jetting? Say that first and we can skip straight to the questions that matter for it. Something else? Pick it from every service we cover.

  • Where you areThe address, and a cross street if the address is new or hard to find. Which end of the valley you are on decides who is closest.
  • What is happening, in your own wordsNo plumbing vocabulary needed. "Water under the sink since this morning" is a better description than a guess at the cause.
  • Whether water is running right nowThis is the question that changes everything else. If it is, say so first and we will talk you to the shutoff before anything else.
  • What you have already triedPlunged it, reset the disposal, flipped the breaker, ran the softener through a regeneration. It saves repeating the steps that did not work.
  • Whether you own or rentA landlord or an HOA sometimes has to authorise the work, and it is better to find that out on the phone than at the door.

Water pouring right now? Do not read the rest of this. Call (725) 255-9011 and shut off the supply while it rings.

Hydro jetting questions

What is hydro jetting?

A high pressure water system that scours the inside wall of a drain or sewer line. Where a cable cuts a path through a blockage, jetting removes the material off the pipe wall, so the line goes back to something close to its original bore.

Do you camera the line before jetting?

Yes, on anything but a line we already know. Pipe material and condition decide whether jetting is safe, and in a valley with plenty of 1980s and earlier plumbing that is not a formality.

How often should a commercial kitchen line be jetted?

It depends on volume and on what goes down the line, so the interval is set from the first inspection and then adjusted from what the second one shows. Reactive jetting in a restaurant is always more expensive than scheduled jetting.

Will jetting fix a broken pipe?

No. It cleans pipe, it does not repair it. If the camera finds a break, a belly or a collapsed section, the honest answer is that the line needs repair and that clearing it is temporary.

Does hard water cause scale in drain lines?

Scale is mostly a hot water and appliance problem, but mineral build up does contribute to narrowing in drain lines over time, alongside grease and soap. In 17 grain water that contribution is not nothing.

Talk to someone about hydro jetting

Describe what is happening and we will tell you what it usually takes to fix, before anyone comes out.